top of page

INTERFACE ENERGY

INTERFACE
ENERGY

Waste Oil Re-Refining

The refinery market is one of the most challenging industries we have seen in the world. Waste mineral oil recycling has matured in many ways over the past 20 years. However, factors such as changing quality standards and environmental policies have replaced the maturing recycling processes with new generation advanced technological systems. Using technologies from decades ago is no longer economical, but means falling behind the market market.

Mineral Waste Oil Re-Refining Technology Types

ASID & CLAY PROCESS

The mineral waste oil is heated in a reactor with flame tube in the middle. With this heating made under vacuum, water, fuel and oil are taken respectively from the mineral waste oil. Clean oil is mixed with sulphuric acid and in this process metal salts, acids, aromatics and other contaminants are separated. It is then mixed with clay for color treatment.

Telif Al.jpeg

Please contact us for price and information.

SWIFT EVAPARATION

Vacuum distillation is a simplified “Front End” of the Solvent Extraction process. It takes advantage of the use of boiling point properties of the used oil to separate various components; water , light hydrocarbons and gas oil, lube distillate and asphalt flux. Vacuum is used to prevent thermal cracking of the hydrocarbons. The main product of vacuum distillation ..........

Telif Al.jpeg

Please contact us for price and information.

SOLVENT EKSTRATION

Vacuum Process mineral waste oil re-refinery plant is a type of process equipped with the lates advanced technology equipment. The equipment of the process consists of flash distillation equipment such as rapid evaporator and thin film evaporator. Solvent extraction is used to improve the quality of the oil distillate produced from the process......

Telif Al.jpeg

Please contact us for price and information.

GET SUPPORT

We develop special processes for operators who want to renew existing technologies or who aim to invest in this sector for the first time. The reason for this is that market conditions differ in each region and each operator.

bottom of page